23
TT-830 Bench Scale Service Manual
11. The backlight timer turns just the
backlight off after a set number
of minutes. Press
YES
to enable
the timer and
NO
to disable it.
Press ENTER. . .
If you press
NO
the display will
return to the CONFIGURE-MENU4
display.
If you press
YES
you are asked to
set the timer length in minutes.
12. Key in the number of minutes
and press
ENTER
. . .
The display returns to the CONFIG-
URE-MENU4 display.
Press
EXIT
twice to return to normal operation. If you changed the configu-
ration you will be asked if you want to save changes. Press
YES
if you do.
NO
, if not.
The default password for the Calibrate level is 30456.
1. Press and hold the
ESCAPE
key
for 3-5 seconds. You will hear a
2nd beep and the display will
change. Key in 30456 and press
ENTER. . .
The screen in Figure 7 is displayed.
Figure 7
Calibrate level display
Figure 8 is a flowchart showing what soft keys or choices appear as you
press the soft keys shown in Figure 7.
When your changes are
completed, secure and protect
them by changing the seal
status. See
Seal
.
Calibrate level
You must key in the password
within 5 seconds of accessing
the password screen or the TT-
830 returns to normal opera-
tion.
Summary of Contents for TT-830
