Avery Weigh-Tronix TT-830, Service Manual

Page: 20 / 50

20
TT-830 Bench Scale Service Manual
The default print format 0
shows gross, tare and net
weights. If you choose another
print format (1-16) you need to
define the format in SimPoser
and download it to the TT-830.
VALS
DMODE
CONFIGURE-MENU 4
Level
FMTPT
2. Repeat step 1 for UNITS ,
PRINT , TARE , ZERO ,
AUTOTARE , and KEYPAD
TARE . . . The display returns to the
CONFIGURE-MENU3 display.
If you press the VALS soft key, follow these instructions.
1. The current setting (enabled ON
or OFF) for the
GROSS display
value is displayed. Press YES to
enable the active value or NO to
disable this active display value,
then press
ENTER . . The current setting for the NET
active value is displayed.
2. Repeat step 1 for all the display
values (NET, TARE, MIN., MAX.,
ROC, G-TOT, N-TOT, C-TOT,
#-TOT, COUNT, VARIABLE,
PCWT, and ADC. . .
The display returns to the
CONFIGURE-MENU3 display.
If you press the DMODE soft key, press ENTER to accept the display mode
number shown or key in a new number (see Appendix 1 ) and press ENTER.
The display returns to the CONFIGURE-MENU3 display. Press the EXIT key
to return to the CONFIGURE display.
Press the MENU4 soft key to access the CONFIGURE-MENU 4 soft key
set.
If you press the FMTPT soft key, follow these instructions:
1. The current serial port number
assigned to Format 1 is
displayed. Press
ENTER to
accept this serial port or key in a
new serial port number and
press
ENTER . . . The serial port assignment for
Format 2 is displayed.
2. Repeat step 1 for up to 16 print
formats and press the
ENTER
key. . . The display returns to the
CONFIGURE-MENU4 display.
The display will ask for a scale
number if Multiscale is enabled.