Avery Weigh-Tronix TT-830, Service Manual

Page: 12 / 50

12
TT-830 Bench Scale Service Manual
Press the VIEW soft key to access the USER-VIEW soft key group:
• VERS Press this key to see TT-830 firmware revision date and
time. Serial number is currently not used. Configuration
information is displayed if a program has been down-
loaded from SimPoser software.
• SEAL Press this key to view the sealed state the scale. Only
while viewing this parameter can you toggle the sealed
state using the S1 button under the sealed access hatch
under the scale platter.
• VARS Press this key to view the BASIC variables.
• STORES Press this key to view the numeric and string values used
with store and recall.
• EXIT Press this key to go back to the previous soft key set.
Following is a detailed description of the four functions listed above.
If you press the VERS soft key you will see the firmware version number.
Serial number is currently not used. When you press any key, if you have
never downloaded a file from SimPoser, you will see only the word CON-
FIGURATION and no other information. If you have downloaded a file, the
following information is displayed:
License # of the SimPoser software.
Name of license holder.
Version number of the SimPoser software.
Name of the downloaded file (application program).
Time and date of the last download.
The display will show Sealed or Unsealed . Press S1 on the main board
through the access hole in the load bridge to change the seal status.
If you press the VARS soft key you will be able to scroll through the vari-
ables you have in your basic program. Press the FIRST soft key to see the
first one and the NEXT soft key to scroll to the next one. Repeat this until
you are through and press the EXIT soft key to return to the USER-VIEW
level.
If no variables are defined the screen will show NO VARIABLES DEFINED .
If you press the STORES soft key, follow these instructions:
1. The display asks if you want to
DISPLAY NUMERICS?, and
gives you the choice of
YES or
NO . If you press YES the display
will look like this:
VERS
SEAL
STORES
VARS
USER-VIEW Level