Avery Weigh-Tronix TT-830, Service Manual

Page: 22 / 50

22
TT-830 Bench Scale Service Manual
4. Press ENTER to accept the
current volume level or key in a
new level (see table below) and
press
ENTER . . . The display shows the current type
style selection for screen text.
Beeper Volume
0 = OFF 2 = Medium
1 = Low 3 = High
5. Press ENTER to accept the
current type style selection or
key in a new style from the table
below and press
ENTER . . . The decimal display cycle is shown.
Type Style
0 = no lowercase 1 = lowercase
6. Press ENTER to accept the
current decimal display cycle
setting or key in a new value
from the table below and press
ENTER . . . The display shows the current low
battery indicator setting.
Decimal Display Mode
0 = OFF 1 = ON
7. Press ENTER to accept the
current low battery indicator
setting or key in a new value
from the table below and press
ENTER . . . The display shows the current sleep
timer setting.
Low Battery Indicator
0 = OFF 1 = ON
8. Press YES to enable the
sleep timer or press NO to
disable the timer. Press ENTER
to accept the choice. . . If you press YES , go to step 9.
If you press NO , skip to step 11.
9. The display asks you to set the
sleep timer in minutes. Key in
the number of minutes of
inactivity before the sleep mode
starts and press
ENTER . . . The display shows the current sleep
warning setting.
10. Select NO to disable the sleep
warning and YES to enable it.
The sleep warning gives an
audio and visual signal one
minute before the scale goes to
sleep. Press
ENTER . . . The display shows the current
setting for the Auto Backlight Timer.
When your changes are
completed, secure and protect
them by changing the seal
status. See
Seal .
If the decimal display is ON
you can scroll through all the
display modes (see Appendix
1) by pressing the decimal (.)
hard key on the indicator. Only
the text supplied by your
BASIC application program will
be displayed.
Low Battery indicator flashes
"LO BATT " when battery
voltage is low.