Avery Weigh-Tronix TT-830, Service Manual

Page: 13 / 50

13
TT-830 Bench Scale Service Manual
2. Press PREV (previous) to see
the previous numeric record.
Press
NEXT to see the next
numeric record. Press SELECT
and the display will let you enter
a specific numeric record
number. When you press
ENTER that record number will
be displayed.
3. If you press NO in step one the
following screen is displayed:
4. This screen lets you view all the
strings stored in your BASIC
program. View them the same
way you did the numeric values.
5. Press EXIT to return to the
USER-VIEW level.
Press EXIT to return to the USER level. Press EXIT one more time and you
are back to normal operation. You have now seen all the parts of the USER
level. The next section of the manual covers front panel configuration.
The deafult password for the Configure level is 2045.
1. Press and hold the ESCAPE key
for 3-5 seconds. You will hear a
2nd beep and the display will
change. Key in 2045 and press
ENTER . . . The screen in Figure 5 is displayed.
If not displayed your system is
sealed or you've used an incorrect
password.
Figure 5
Configuration level display
When your changes are
completed, secure and protect
them by changing the seal
status. See
Seal in the previ-
ous section
You must key in the password
within 5 seconds of accessing
the password screen or the TT-
830 returns to normal opera-
tion.
Configure level
There are two types of
memory:
• Standard
• Expanded
Standard memory has loca-
tions
0-8191for numeric storage and
0-4095 for string storage.
Expanded memory has loca-
tions
8191-16383 for numeric
storage and 4096-8191 for
string storage.
If you do not have the ex-
panded memory installed, the
expanded memory location
returns a zero.