Avery Weigh-Tronix E1070, Service Manual

Page: 43 / 164

E1070 Service Manual 43
3.4 Service Menu
5. Toggle between the choices by using the TARE or UNITS key and press
ENTER to accept the displayed choice…
A string of numbers appears. See example and note below.
These numbers represent the default print format in numbered
sequence of hexadecimal commands. Each hexadecimal command
represents one printing character or print command. These numbers
allow you to customize the print output of the indicator.
See Extra Info: Print Format Editing on page 47 for full explanation and
instruction on modifying a print format.
6. Modify the print format as needed and press the ENTER key when finished. .
String is displayed.
7. Press the UNITS key…
P-Ft is displayed. This stands for print format. You can send one or more
print formats through a port each time the PRINT key is pressed. This is
the item you use to define which formats get printed.
8. Press the PRINT key…
Numeric entry screen is displayed.
9. Key in the format numbers you want printed. See note below. For example, to
print formats 0, 1, and 4, key in 014 and press the
ENTER key. To print the 0,
1, 3, and 10 formats, key in 01310 and press the ENTER key…
P-Ft is displayed.
There are default print formats for each application. These are all given a format
number = 0.
You can exit the Service menu at any time by pressing the ESC key. When SAvE
appears on screen you can press ESC to lose any changes or press ENTER to save
the changes and return to normal operating mode.
When you key in a 1 followed by a 0, the indicator is smart enough to know this is a 10
not separate 1 and 0 formats.
Always enter format numbers in ascending order.