Avery Dennison SNAP 600, User Manual

Page: 54 / 141

54
User’s Manual—SNAP™ 600 Printer
8. Properly dispose of the used knife assembly.
9. To insert the new knife assembly, slide it down vertically into the space
between the Auxiliary Feed and the Nip Rollers.
10. Hold the knife assembly on the upper outboard corner. Use a flat blade
screwdriver to rotate the rotary knife blade with the screw slot in the knife
until the knife blade slips into the drive shaft.
11. Continue to hold the knife assembly in place. Use a Phillip’s head
screwdriver to retighten the screw.
12. Turn on the power to the printer and allow the knife to return to home
position.
13. Rethread the stock through the Auxiliary Feed, Nip Roller, and knife.
5.4.2 Adjust the Knife Home Position
To adjust the Knife Home Position, follow the procedure listed below.
1. Insert a flat blade screwdriver into the slot in the end of the knife.
2. Rotate the screwdriver counterclockwise until you hear an audible click.
3. Continue to turn the screwdriver approximately 1/8 of a rotation more.