Avery Dennison SNAP 600, User Manual

Page: 45 / 141

User’s Manual—SNAP™ 600 Printer
45
The available choices are:
•
Format – use the print speed specified in the format. If the print speed
does not exist in the AVERY DENNISON SNAP 600 printer, it will use
the closest print speed that is not greater. For example, if the format was
designed for a 676 printer and calls for 5 ips, the AVERY DENNISON
SNAP 600 printer will use 4.5 ips.
•
Translate – uses the corresponding speed from the printer specified in the
format. For example, if the format was designed for a 676 printer and
called for 5 ips (the third speed in the printer’s speed list of 3, 4, and 5
ips), the AVERY DENNISON SNAP 600 printer would use 6 ips, which is
the second speed in its speed list of 4.5, 6, 7, 10 and 12 ips.
•
4.5, 6, 7, 10 or 12 – selects the desired print speed.
4.4.5 Selecting the Flagging Mode
This selection allows you override the flagging mode specified in the format. It
is set in the same way as the Print Speed.
The available selections are:
• Format – uses the flagging mode specified in the format
•
Side-step – This selection is for the High Volume Stacker, which is not
available for the AVERY DENNISON SNAP 600 printer. Do not select
this.
•
Disabled – Disables flagging. No flagging will be done.
4.4.6 Selecting the Sense Mark Type
This selection allows you to override the sense mark type (none, top through
hole or bottom reflective) selected in the format. Its main purpose is to allow you
to activate the optional Contrast Sensor, since older formats or formats for other
AVERY DENNISON printers will not have the Contrast Sensor type.
This option is set in the same way as Print Speed.
The available selections are:
•
Format – use the sense mark type specified in the format
•
Top Hole Sensor, Bottom Reflective, Contrast – selects the sensor type
•
Disabled – ignores the sense mark. This is useful when designing a
format using blank stock to avoid wasting the more expensive pre-
printed stock.