Avery Dennison SNAP 600, User Manual

Page: 26 / 141

26
User’s Manual—SNAP™ 600 Printer
Figure 10. Stock Supply Through Knife and Stacker
3.1.4 Butt Splice
CAUTION: To prevent damage to the print head, do not
use butt splices.
The AVERY DENNISON SNAP 600 printer is designed to allow for fast, frequent
changing and loading of stock and supplies. On this model it is quicker to re-
thread the stock than to use a butt splice.
3.2 Sending a Print Job to the Printer
In order to print labels, you must send a Print Job to the printer. The Print Job
tells the printer what label to print, what information to print on the label, and
how many labels to print.
How a Print Job gets to the printer depends on how your company system is set
up. You may be using AVERY DENNISON’s label design program PCMate
Platinum, or you may be using a special application on a PC or a mainframe.
Consult your supervisor on how your company sends Print Jobs.
Stock Web
Guide Knob
Upper Print
Roller
Feed Roller
Knife
Stacker
Lower Print
Roller