Avery Dennison SNAP 600, User Manual

Page: 35 / 141

User’s Manual—SNAP™ 600 Printer
35
3.4.2 Using Voice Demos
To help you become more familiar with your AVERY DENNISON SNAP 600
printer, the machine is equipped with two voice demos. Demo 1 provides a basic
introduction to the printer. Demo 2, consisting of 21 separate voice messages,
reviews the basic features of the printer one-by-one.
NOTE: To exit the Voice menu, press and hold the Voice
button at the end of any voice prompt.
Demo 1
1. Press and hold the Voice button longer than two seconds to activate the
Option Menu System.
2. The voice message will say, “Press Start for Test Pattern.”
3. Press the Voice button.
4. The voice message will say, “Press Start for Demos.”
5. Press the Start button.
6. The voice message will say, “Press Start for Demo 1.”
7A. Press the Start button. The machine will play Demo 1 and exit.
Demo 2
If you want to select Demo 2, repeat steps 1-6 in the Demo 1 section above.
7B. Press the Voice button. The voice message will say, “Press Start for Demo
2.”
8. Press the Start button. This will activate the series of 21 voice messages. At
the end of each message, you can either press Voice to repeat the message, or
press Start to advance to the next message.
NOTE: When listening to Demo 2, press the Voice button
to repeat a message, and press the Start / Stop button to
advance to the next message.
9. After the last message plays, the machine states, “This concludes our demo.”
The machine exits by itself.
10. If you are at Step 7B above and you decide not to listen to Demo 2, press the
Voice button, which advances you to the Change Volume menu. The voice
message responds with, “Press Start to Set Volume.”