Avery Dennison SNAP 600, User Manual

Page: 36 / 141

36
User’s Manual—SNAP™ 600 Printer
Figure 12b. Running Voice Demos
3.4.3 Setting / Adjusting Voice Button Volume
The volume level of the voice messages on your AVERY DENNISON SNAP 600
printer is set at Level 3 at the factory. If you want to adjust the voice button’s
volume setting on your printer, follow the steps listed below.
NOTE: When you select volume setting, the menu will
begin with the current volume at which your machine is
set, Level 3.
1. Press and hold the Voice button longer than two seconds to activate the
Option Menu System.
2. The voice message will say, “Press Start for Test Pattern.”
3. Press the Voice button. The voice message will say, “Press Start for Demos.”
4. Press the Voice button. The voice message will say, “Press Start to Set
Volume.”
5. Press the Start / Stop button. The voice message says, “Press Start for
Volume Level 3.”
To increase from volume level 3 to 5, follow these additional steps.