168
-
Start Recording
Record the video from the selected camera.
i
EH5108/EH5108H/EXR5008 series only has 8 channels will be available.
1. Beside the Start Recording check box, click
Detail
.
2. In the Alarm Recording Setting dialog box, select the
camera to enable/disable video recording. Enable
All
to
select all cameras.
3. In the Frame Rate selection, select
As Setting
to record
the number of frames based on the Recording Setting.
4. In the
Start Record prior
text box, mark and set the
number in second for the program to begin recording after
the alarm has been trigger. The time range is 1~10
seconds.
5. In the
Stop Record after
text box, mark and set the
number in second for the program to continue recording
after the alarm has ended. The time range is 1~999
seconds. If user doesn
’t mark and set the time, the alarm recording will continue recording until alarm
is reset.
6. Click
OK
to accept the new settings and
Cancel
to exit without saving.
-
PTZ preset point
Position the PTZ camera based on the preset point setting. Beside
the PTZ preset point check box, click
Detail
. In the Trigger PTZ
Preset Setting dialog box, select the PTZ camera number then
select the
Enable
check box. Select the position of the PTZ camera
when the alarm is activated and ended. For the PTZ camera end
point, user can also select on preset position or
Auto Pan
between
preset position groups.
-
Send to CMS (Central Management System)
i
EH5108/EH5108H/EXR5008 series only has 8 channels will be available.
Enable/disable the selected camera to send video to
CMS when the alarm is activated. Beside the Send to
CMS check box, click
Detail
. In the CMS Setting, select
the camera to enable/disable sending the video to CMS.
Enable
All
to select all cameras. Then, click
OK
to
accept the new settings and
Cancel
to exit without
saving.
Summary of Contents for AVerDiGi EH5108
Page 1: ...Jan 2011...
Page 8: ......
Page 66: ...58...
Page 179: ...171 8 For manually backup click file select button and select the DVR to backup...
