Avaya one-X 1603SW, Administrator'S Manual, Page: 92 / 124

Administering Telephone Options
92 Avaya 1603SW-I SIP Deskphones Administrator Guide
●
will not forward frames received with the 802.1AB LLDP group multicast address as the
destination MAC address between the Ethernet line interface and the secondary Ethernet
interface.
A 1603SW-I SIP IP Deskphone initiates LLDP after receiving an LLDPDU message from an
appropriate system. Once initiated, the telephones send an LLDPDU every 30 seconds with the
following contents:
Table 13: LLDPDU Transmitted by the 1603SW-I SIP IP Deskphones
Category TLV Name (Type) TLV Info String (Value)
Basic Mandatory Chassis ID IPv4 IP Address of telephone.
Basic Mandatory Port ID MAC address of the telephone.
Basic Mandatory Time-To-Live 120 seconds.
Basic Optional System Name The Host Name sent to the DHCP server in
DHCP option 12.
Basic Optional System Capabilities Bit 2 (Bridge) will be set in the System
Capabilities if the telephone has an internal
Ethernet switch. If Bit 2 is set in Enabled
Capabilities then the secondary port is
enabled.
Bit 5 (Telephone) will be set in the System
Capabilities. If Bit 5 is set in the Enabled
Capabilities than the telephone is registered.
Basic Optional Management Address Mgmt IPv4 IP Address of telephone.
Interface number subtype = 3 (system port).
Interface number = 1.
OID = SNMP MIB-II sysObjectID of the
telephone.
IEEE 802.3
Organization
Specific MAC / PHY
Configuration / Status Reports autonegotiation status and speed of
the uplink port on the telephone.
TIA LLDP MED LLDP-MED
Capabilities Media Endpoint Discovery - Class III - IP
Telephone.
TIA LLDP MED Extended
Power-Via-MDI Power Value = 0 if the deskphone is not
currently powered via PoE, else the
maximum power usage of the deskphone
plus
all modules and adjuncts powered by the
telephone in tenths of a watt.
1 of 2