manualshive.com logo in svg

Avaya one-X 1603SW, Administrator'S Manual, Page: 7 / 124

Share
Download
Avaya one-X 1603SW Administrator'S Manual Download Page 7

Issue 1 June 2010

7

Chapter 1: Introduction

About This Guide

This guide is for personnel who administer Avaya Aura™ Communication Manager or Avaya 
Midsize Business Template 5.2.1, HTTP/HTTPS servers for Avaya 1603SW-I IP Deskphones 
using Session Initiation Protocol (SIP), a Local Area Network (LAN), Avaya Aura Session 
Manager, Avaya SIP Enablement Services (SES), or a Network Time server. 

The 1603SW-I IP Deskphones use Internet Protocol (IP) technology with Ethernet line 
interfaces and support both SIP and H.323 protocol only. The 1603SW-I IP Deskphones provide 
support for DHCP, HTTP, and HTTPS, which enhance the administration and servicing of the 
deskphones. These deskphones use DHCP to obtain dynamic IP Addresses, and HTTPS or 
HTTP to download new versions of software or customized settings for the deskphones.

Note:

Note:

This document covers SIP administration for 1603SW-I SIP Deskphones only. 
For administration for 1603SW-I IP Deskphones using the H.323 protocol, see 
the 

Avaya 1600 Series IP Deskphones Administrator Guide.

This document does not cover installation or administration for Avaya Aura

™

 

Session Manager. Find full documentation for Avaya Aura

™

 Session Manager on 

the Avaya support Web site, 

www.avaya.com/support

, specifically 

Installing and 

Upgrading Avaya Aura™ Session Manager

 (Document Number 03-603473) and 

Administering Avaya Aura™ Session Manager

 (Document Number 03-603324).

For more information about administering Avaya Midsize Business Template 
Release 5.2.1 and Avaya SES R5.2.1, go to 

www.avaya.com/support

.

!

Important:

Important:

Avaya does not provide product support for many of the products mentioned in 
this document. Take care to ensure that there is adequate technical support 
available for servers used with any 1603SW-I IP and/or SIP Deskphone system. 
If the servers are not functioning correctly, the 1603SW-I IP Deskphones might 
not operate correctly.

Summary of Contents for one-X 1603SW





























































































































Reviews:

No comments