manualshive.com logo in svg

Avaya one-X 1603SW, Administrator'S Manual, Page: 68 / 124

Share
Download
Avaya one-X 1603SW Administrator'S Manual Download Page 68

Telephone Software and Binary Files

68 Avaya 1603SW-I SIP Deskphones Administrator Guide

 

The following are example settings only. Your settings will vary from the settings shown. This 
sample assumes specification of a DNS Server, identifying SIP-specific settings, and setting the 
time/date.

##

##

## Define the Domain Name Server to be "dns.example.yourco.com"

## Note that quotes are only needed for parameters that contain 

spaces.

##

SET DNSSRVER dnsexample.yourco.com

##

##

## SIP Proxy/Registrar servers list

##  SIP_CONTROLLER_LIST provides ability to configure SIP Proxy/

Registrar list.

##  The format is host[:port];[transport:xxx]. A comma seperated 

list in this

##  format can be provided. Host can be DNS name or IP address. Port 

is optional. 

##  If port is not specified then default value of 5060 for TCP and 

UDP and 5061 for

##  TLS will be used. Transport type is optional. It can be tcp or 

udp or tls.

##  Default value of tls will be used if it is not provided.

SET SIP_CONTROLLER_LIST proxy1,proxy2:5070;transport=udp

##

##

##  SIPDOMAIN sets the domain name to be used during

##  registration.  The default is null ("") but valid values

##  are 0 to 255 ASCII characters with no spaces.

SET SIPDOMAIN   example.com

##

##

##  SNTPSRVR sets the IP address or Fully-Qualified 

##  Domain Name (FQDN) of the SNTP server(s) to be used.

Summary of Contents for one-X 1603SW





























































































































Reviews:

No comments