Avaya one-X 1603SW, Administrator'S Manual, Page: 70 / 124

Telephone Software and Binary Files
70 Avaya 1603SW-I SIP Deskphones Administrator Guide
## See 1603SW-I SIP IP Deskphones Customizeable System Parameters
for format and setting alternatives.
## SET DSTSTOP "1SunNov2L"
##
------------------------------
See Chapter 8: Administering Telephone Options for details about specific values. You
need only specify settings that vary from defaults, although specifying defaults is
harmless.
VLAN separation controls whether or not traffic received on the secondary Ethernet interface is
forwarded on the voice VLAN and whether network traffic received on the data VLAN is
forwarded to the telephone. Add commands to the 46xxsettings.txt file to enable VLAN
separation. The following three lines will enable VLAN separation when the data VLAN ID is
"yyy" and the data traffic priority is "z":
●
Enable VLAN separation by setting the parameter to 1:
SET VLANSEP "1"
●
Define the data VLAN ID (for any computer connected to the second ethernet port on the
phone) to be 'yyy':
SET PHY2VLAN "yyy"
●
Define the priority of the data traffic to be 'z':
SET PHY2PRIO "z"
Note:
Note:
When the configuration parameter VLANSEP is set to "1" you should configure
the network switch so that 802.1Q tags are not removed from frames forwarded
to the telephone.
The GROUP System Value
You might have different communities of users, all of which have the same telephone model, but
which require different administered settings. For example, you might want to group users by
time zones or work activities.
Use the GROUP system value for this purpose:
1. identify which telephones are associated with which group, and designate a number for
each group. The number can be any integer from 0 to 999, with 0 as the default, meaning
your largest group is assigned as Group 0.
2. At each non-default telephone, instruct the installer or user to invoke the GROUP Craft
Local procedure as specified in the Avaya one-X™ Deskphone Value Edition SIP for
1603SW-I IP Deskphones Installation and Maintenance Guide and specify which GROUP
number to use. The GROUP System value can only be set on a phone-by-phone basis.