manualshive.com logo in svg

Avaya one-X 1603SW, Administrator'S Manual, Page: 15 / 124

Share
Download
Avaya one-X 1603SW Administrator'S Manual Download Page 15

The Administrative Process

Issue 1 June 2010

15

 

●

If the server to which a specific telephone points is changed manually using the local 
administrative ADDR procedure, that value now takes precedence over the previous 
value.

Note:

Note:

The only exception to this sequence is in the case of VLAN IDs. In the case of 
VLAN IDs, LLDP settings of VLAN IDs are the absolute authority. Then the usual 
sequence applies. For the L2QVLAN and L2Q system values, LLDP settings of 
VLAN IDs are the absolute authority only if the LLDP task receives the VLAN IDs 
before DHCP, and the DHCP client of the telephone is activated. If the LLDP task 
receives the VLAN IDs after DHCP negotiation, several criteria must be 
successful before the telephone accepts VLAN IDs from LLDP. For more 
information, see 

Link Layer Discovery Protocol (LLDP)

on page 91.

The Administrative Process

The following list depicts administration for a typical 1603SW-I SIP IP Deskphone network. Your 
own configuration might differ depending on the servers and system you have in place. 

1. Avaya Communication Manager 6.0 or greater or Avaya Midsize Business Template 5.2.1 

administered for 1603SW-I IP Deskphones. Administer 1603SW-I SIP Deskphones aliased 
as the 9620SIP station type.

2. Avaya Session Manager 6.0 or greater or Avaya SES 5.2.1 administered.

Note:

Note:

Avaya SES 5.2.1 is supported only with Avaya Midsize Business Template 5.2.1.

3. LAN and applicable servers (file servers, Network Time server) administered to accept the 

telephones.

4. Telephone software downloaded from the Avaya support site.

5. 46xxsettings file updated with site-specific and SIP-specific information, as applicable. 

6. 1603SW-I IP Deskphones installed. For more information, see the 

Avaya one-X™ 

Deskphone Value Edition SIP for 1603SW-I IP Deskphones Installation and Maintenance 
Guide

.

7. Individual 1603SW-I IP phones updated using local administrative procedures, as 

applicable. For more information, see “Local Administrative Procedures” in the 

Avaya 

one-X™ Deskphone Value Edition SIP for 1603SW-I IP Deskphones Installation and 
Maintenance Guide

.

8. Survivability administration to set up the local SIP gateway and administer additional 

controllers in the settings file as applicable. 

Summary of Contents for one-X 1603SW





























































































































Reviews:

No comments