manualshive.com logo in svg

Avaya one-X 1603SW, Administrator'S Manual, Page: 75 / 124

Share
Download
Avaya one-X 1603SW Administrator'S Manual Download Page 75

Administering Options for the 1603SW-I SIP IP Deskphones

Issue 1 June 2010

75

 

DHCPSTD

0

DHCP Standard lease violation flag. Indicates whether to 
keep the IP Address if there is no response to lease 
renewal. If set to “1” (No) the telephone strictly follows 
the DHCP standard with respect to giving up IP 
Addresses when the DHCP lease expires. If set to “0” 
(Yes) the telephone continues using the IP Address until 
it detects reset or a conflict (see 

DHCP Generic Setup

).

DIALPLAN

" " (Null)

Dial plan for operation with a secondary controller. The 
DIALPLAN parameter is used to determine one or more 
valid dialstrings. Valid value is 0 to 1023 characters that 
define the dial plan. See 

Setting the Dial Plan on SIP IP 

Telephones

 for more information.

DNSSRVR

0.0.0.0

Text string containing the IP Address of zero or more 
DNS servers, in dotted-decimal format, separated by 
commas with no intervening spaces (0-255 ASCII 
characters, including commas).

DOMAIN

" " (Null)

Text string containing the domain name to be used when 
DNS names in system values are resolved into IP 
Addresses. Valid values are 0-255 ASCII characters. 

DOT1X

0

Defines the telephone's operational mode for IEEE 
802.1X.Valid values are: 
0 = Unicast Supplicant operation only, with PAE multicast 
pass-through, but without proxy Logoff.
1= Unicast Supplicant operation only, with PAE multicast 
pass-through and proxy Logoff. 
2= Unicast or multicast Supplicant operation, without 
PAE multicast pass-through or proxy Logoff.

DOT1XSTAT

0

IEEE 802.1X status. Enables/disables IEEE 802.1X 
function and, if enabled, additionally defines reaction on 
received multicast or unicast EAPOL messages. Valid 
values are:
0 = Supplicant operation disabled.
1 = Supplicant operation enabled, but responds only to 
received unicast EAPOL messages. 
2 = Supplicant operation enabled, responds to received 
unicast and multicast EAPOL messages.

DSCPAUD

46

Differentiated Services Code Point for audio. Values 
range from 0 to 63.

DSCPSIG

34

Differentiated Services Code Point for signaling. Values 
range from 0 to 63.

DSTOFFSET

1

Used for daylight saving time calculation in hours. Values 
range from 0 to 2.

Table 11: 1603SW-I SIP IP Deskphones Customizeable System Parameters  (continued)

Parameter Name

Default 

Value

Description and Value Range

2 of 10

Summary of Contents for one-X 1603SW





























































































































Reviews:

No comments