manualshive.com logo in svg

Avaya one-X 1603SW, Administrator'S Manual, Page: 86 / 124

Share
Download
Avaya one-X 1603SW Administrator'S Manual Download Page 86

Administering Telephone Options

86 Avaya 1603SW-I SIP Deskphones Administrator Guide

 

Note:

Note:

If the telephone returns to the default VLAN but must be put back on the 
L2QVLAN VLAN ID, you must Reset the deskphone. See the Reset procedure in 
the 

Avaya one-X™ Deskphone Value Edition SIP for 1603SW-I IP Deskphones 

Installation and Maintenance Guide

.

VLAN Separation

VLAN separation is available to control access to the voice VLAN from the secondary Ethernet 
interface, and to control whether broadcast traffic from the data VLAN is forwarded to the 
deskphone. The following system parameters control VLAN separation:

●

VLANSEP

 - enables (1) or disables (0) VLAN separation. 

●

PHY2VLAN

 - specifies the VLAN ID to be used for frames forwarded to the network from 

the secondary Ethernet interface.

●

PHY2PRIO

 - the layer 2 priority value to be used for tagged frames forwarded to the 

network from the secondary Ethernet interface. 

Table 12

 provides several VLAN separation guidelines. 

Summary of Contents for one-X 1603SW





























































































































Reviews:

No comments