Avaya one-X 1603SW, Administrator'S Manual, Page: 101 / 124

Interface Control
Issue 1 June 2010 101
●
Status is 100Mbps FDX when PHY1STAT = 5
3. To change the PHY1 value, press * .
Depending on the current value, the next sequential valid PHY1 value is selected and
displayed as the status. For example, if the current value is 10Mbps HDX (2), pressing
*
changes the value to 3 (10Mbps FDX).
4. Press the * button to terminate the procedure, or the # button to save the new value. If you
press the # button, the following text displays:
where status is the value of PHY2STAT, defined as:
●
Status is disabled when PHY2STAT = 0
●
Status is auto when PHY2STAT = 1
●
Status is 10Mbps HDX when PHY2STAT = 2
●
Status is 10Mbps FDX when PHY2STAT = 3
PHY2=
status
*=change #=OK