Avaya 4620SW, User Manual

Page: 84 / 96

Telephone Management and Troubleshooting
84 4620SW/4621SW SIP IP Telephone Release 2.2 User Guide
Ringing (Incoming) Tones Meaning
1 Ring -------- Call from another extension.
2 Rings ------- ------- Call from outside or the System Administrator.
3 Rings ------ ------ ------ Priority call from another extension, or from an
Automatic Callback call you placed.
Half Ring (ring-ping) --- A call is being redirected from your telephone
to another because Call Forwarding of all calls
is active.
Feedback (Handset) Tones Meaning
Busy --- --- --- Low-pitched, rapid tone repeated 60 times
per minute, signifying the number dialed is
in use.
Call Waiting Ringback Tone ---_ A ringback tone with lower-pitched signal at
the end. This tone indicates the extension
called is busy and the called party was given
a call waiting tone. Call waiting ringback
tone generation depends on the type of
telephone being called.
Confirmation -- -- -- Three short tone bursts indicate a feature
activation or cancellation was accepted.
Coverage - One short tone burst indicates your call is
being sent to another extension for a
covering user to answer. Coverage tone
generation depends on the type of
telephone being called.
Dial --------- Continuous tone indicating dialing can start.
Recall Dial - - - ----------- Three shorts tone bursts followed by a
steady dial tone indicate a feature request
was accepted and dialing can start.
Reorder -- -- -- -- -- -- Fast busy tone repeated each half-second
indicates all telephone trunk lines are busy.
A dialing error or the type of telephone being
called might cause a Reorder tone.
Ringback ---- ---- ---- ---- Low-pitched tone repeated 15 times a
minute indicates the number dialed is
ringing.