Avaya 4620SW, User Manual

Page: 78 / 96

4620SW/4621SW SIP IP Telephone Options
78 4620SW/4621SW SIP IP Telephone Release 2.2 User Guide
5. To relabel a Feature button, use the dialpad and any applicable Line/Feature buttons. Use
13 or less characters to enter the new label. To restore the default label to the selected
Feature button, select
Clear to remove the label you previously defined. For more
information about data entry, see Using the Dialpad to Enter Characters in Chapter 3 . For
more information, also see Editing During or After Entry in Chapter 3 .
6. Select Save to save the new/modified label or to restore the default label as applicable.
Alternately, select Cancel to exit the screen without saving a change or restoring the default
label.
The Feature Button Labeling screen redisplays .
Note:
Note:
Some Feature buttons might be provided as part of your telephone software. As
part of a software upgrade, such standard Feature button labels can be
overwritten with a new, standard label. In this event any relabeling you performed
on those standard Feature buttons is erased.
Changing a Telephone/PC Ethernet Interface
The 4620SW/4621SW SIP IP Telephone usually communicates with any optionally-attached
PC in auto-negotiation mode. This basically means the PC and telephone together decide how
to communicate when they are connected. Although unlikely, there might be an occasion where
you or your System Administrator want to force this communication to a particular setting.
1. Select PC Ethernet interface from the second Options Main screen.
The telephone displays the PC Ethernet Interface screen, which shows the current setting .
2. Press the Line/Feature button on either side of the desired setting.
The Current setting changes to your selected setting .
3. To save your selection, select Save . To restore the original setting without changing it,
select Cancel .
The second Options Main screen redisplays .