1. Press
POWER
to display the EZ-
SCAN scanner opening screen.
2. Press
DATA
to display the Data
menu. Make sure
1-KOEO Codes
is highlighted, then press
ENTER
.
3. If no faults are detected during the
KOEO test, the vehicle’s computer
will store
code 11
or code
111
System Pass
. If a fault is detect-
ed, the fault and its description will be
displayed on the scanner screen.
The fault code number will be dis-
played in the upper left corner of the
screen.
•
A down arrow on the screen
indicates more information. Use
the arrow keys to view the addi-
tional text.
•
Use the
t
and
u
arrow keys to
view any other faults.
4. Press
DATA
to exit Data mode and display the opening screen.
V
IEW THE
M
EMORY
(T
ROUBLE
) C
ODES
- F
ORD
Before You Start
•
Your vehicle must be scanned before viewing the data. If
DATA
is pressed, and the vehicle has not been scanned,
the scanner will display
Press the Scan key to
Scan New Data
. Refer to “Key ON, Engine OFF
(KOEO) Scan” on page 33.
•
Memory Codes are intermittent faults that are detected by
Page 40
111 System Pass
V
IEW THE
KOEO C
ODES
- F
ORD
(C
ONT
.)
1-KOEO Codes
2-Memory Codes
3-KOER Codes
4-Clear Codes
5-DCL Data
6-EZ-PC
Summary of Contents for EX-SCAN 5000
Page 1: ...USERS MANUAL...
Page 95: ...NOTES Page 95...
Page 96: ...NOTES Page 96...
Page 97: ...NOTES Page 97...
