AutoXray EX-SCAN 5000, User Manual

Page: 31 / 97

The following Readiness Tests are supported by the scanner:
C
ONTINUOUS
N
ON
-C
ONTINUOUS
Misfire Monitoring Catalyst Monitoring
Fuel System Monitoring Heated Catalyst Monitoring
Comprehensive Evaporative System Monitoring
Component Monitoring Secondary Air System Monitoring
A/C System Refrigerant Monitoring
O2 Sensor Monitoring
O2 Sensor Heater Monitoring
EGR System Monitoring
4. Press
MON
to exit the Readiness Test and display the opening
screen.
Test Results - OBD-II
• [OBD-II] Your scanner must be
connected, and the key in the
ON position, before viewing
OBD-II Readiness Test data. If
MON
is pressed, and the vehi-
cle has not been scanned, the
scanner will display
Press
the Scan key to Scan
New Data
. Refer to “Scanning
the Vehicle” on page 13.
1. Press POWER to display the EZ-
SCAN scanner opening screen.
2. Press MON to display Monitor menu.
Use the arrow keys until
4- Test Results
is highlighted,
then press ENTER .
3. The Test Result will be displayed, fol-
Page 31
R
EADINESS
T
ESTS
- OBD-II
(C
ONT
.)
AutoXray 6000
OBD-II Generic
1-Capture Mode
2-O2 Sensor Tests
3-Readiness Tests
4-Test Results
5-Veh. Information