1. Make sure you have completed a vehicle scan. Then press
POWER
.
2. Press DATA to display the Data menu. Use the arrow keys until
5-Customize Data is highlighted, then press ENTER.
3. From the menu, you have several options, for selecting and des-
electing operational data items. The simplest option is to use the
down arrow key. A menu screen will display DESELECT ALL?
Press ENTER on YES. All data items are now deselected. Use
the left or right arrow keys to scroll through the data items and
press the ENTER key for each data item you would like to select,
for viewing data, in the OPERATIONAL DATA or CAPTURE DATA
modes.
NOTE: The maximum number of data items that can be viewed in
Capture Mode is 20.
Before You Start
•
Use Capture Mode to help diagnose intermittent problems
that occur while driving the vehicle by capturing data before,
during, and after a problem occurs.
NOTE:
[GM] On carbureted vehicles and a few fuel injected
vehicles, the on-board computer is placed into Service
Mode, a mode which fixes the timing and the idle speed.
If the idle speed on your fuel injected vehicle is affected
during scanning, AutoXray recommends that you do not
drive your vehicle while it is scanned.
•
[OBD-II] The Capture Mode will capture up to a maximum
of 20 data items. Use Customize Data function to select
which data items to be captured and displayed. See page
C
USTOMIZING
D
ATA
I
TEMS
- OBD-II
Page 25
C
APTURE
M
ODE
- OBD-II, GM, C
HRYSLER
Summary of Contents for EX-SCAN 5000
Page 1: ...USERS MANUAL...
Page 95: ...NOTES Page 95...
Page 96: ...NOTES Page 96...
Page 97: ...NOTES Page 97...
