Before You Start
•
Your vehicle must be scanned
before viewing the KOER data. If
DATA
is pressed, and the vehicle
has not been scanned, the scan-
ner will display Press the
Scan
key to Scan New Data
.
Refer to “Key ON, Engine
Running (KOER) Scan” on page
33.
1. Press
POWER
to display the EZ-
SCAN scanner opening screen.
2. Press
DATA
to display the Data menu.
Use the arrow keys until
3-KOER
Codes
is highlighted, then press
ENTER
.
3. If no KOER faults are in the vehicle’s
computer,
code 11 or code
111
System Pass
will be displayed.
If a fault is detected, the fault and its
description will be displayed on the
scanner screen. The fault code num-
ber will be displayed in the upper left
corner of the screen.
•
A down arrow on the screen indi-
cates more information. Use the
arrow keys to view the additional
text.
•
Use the
t
and
u
arrow keys to
view any other faults.
4. Press
DATA
to exit Data mode and
display the opening screen.
Page 42
111 System Pass
123 Throttle
Position sensor is
out of range
V
IEW THE
KOER C
ODES
- F
ORD
1-KOEO Codes
2-Memory Codes
3-KOER Codes
4-Clear Codes
5-DCL Data
6-EZ-PC
Summary of Contents for EX-SCAN 5000
Page 1: ...USERS MANUAL...
Page 95: ...NOTES Page 95...
Page 96: ...NOTES Page 96...
Page 97: ...NOTES Page 97...
