6. Other functions
87
© Copyright Reserved Autonics Co., Ltd.
i. -|Transparent setting guide|-
6.5.1 Wiring
NPN output
PNP output
(Pink)Auxiliary output 1 or 2
Load
(Brown)+24VDC
(Blue)0V
Emitter
or
Receiver
(Pink)Auxiliary output 1 or 2
(Brown)+24VDC
(Blue)0V
Emitter
or
Receiver
Load
※
Auxiliary output (AUX 1) is provided to the receiver, and auxiliary output (AUX 2) is provided to the emitter.
※
In case of series connection, the auxiliary output can be used only in the emitter and receiver of master set.
6.5.2 Setting change
The auxiliary output cannot be deactivated. You can change the mode via setting switch or atLightCurtain.
Only SFLA (advanced type) support atLightCurtain to change settings.
Function
Setting item
Setting range
Factory default
Setting method
atLightCurtain
Setting switch
Auxiliary output 1
(AUX 1, receiver)
Output mode
※1
OSSD
○
-
Output phase
Reverse/Normal
Reverse
Output pattern
※2
Light ON/Flashing Light ON
Auxiliary output
2
(AUX 2, emitter)
Output mode
※1
Error/Lockout
Output phase
Reverse/Normal
Reverse
Output pattern
※2
Light ON/Flashing Light ON
※
1: For more information on output mode, see "(2) Set auxiliary output mode".
※
2: If the output pattern is set to flashing, it flashes every 0.5 sec.
Auxiliary output
[Flashes]
ON
OFF
0.5sec
1sec
※
When the muting is activated, the auxiliary output (AUX 2) of emitter cannot be used.
