7. Wiring
98
© Copyright Reserved Autonics Co., Ltd.
i. -|Transparent setting guide|-
(2) PNP output
(Brown)+24VDC
(Brown)+24VDC
(Brown)+24VDC
(Black)External test input
(Black)OSSD 1 output
(White)OSSD 2 output
(White)Reset input
(Orange)Reset hold input/Mute 1 input
(Pink)AUX 2 output/Mute 2 input
(Pink)AUX 1 output
(Orange)EDM input
(Black)Lamp output 2
※3
(Black)Lamp output 1
※3
(Blue)0V
(Red)RS485(A)
(Red)RS485(A)
(Yellow)RS485(B)
(Yellow)RS485(B)
(Blue)0V
Load
Load
Load
Load
max.
300mA
max.
300mA
(Blue)0V
(Blue)0V
Load
(Brown)+24VDC
max. 300mA
max. 300mA
max. 100mA
Input circuit
Input circuit
Input circuit
Input circuit
Input circuit
Emit
ter main cir
cuit
Rec
eiv
er main cir
cuit
S3
S1
※2
S1
※1
+
-
S2
※2
GND
GND
+V
+V
8
6
7
2
5
1
4
3
3
4
2
5
6
1
7
8
※
1: Reset switch for the override input.
※
2: Use the muting sensors have the same output type (NPN, PNP) and 3-wire transistor output or N.O. contact.
Use sensors that output is ON when detecting an object, and operate in Dark ON mode.
※
3: This wiring is used to activate the lamp output and the external indicator displays a status depending on
the selected output mode.
※
If there is a potential malfunction due to noise, combine a protection circuit to the input wiring, or connect a device with
a protection circuit and apply the signal.
※
RS485(A) and RS485(B) are for the synchronous line.
