3. Dimensions
36
© Copyright Reserved Autonics Co., Ltd.
i. -|Transparent setting guide|-
(2) Front part - When removing the cover
Tighten the cover screws on the front part with a torque of 0.59 N m.
<Receiver>
11
12
13
<Emitter>
11
13
11. 7-Segment display:
It shows the status of light curtain.
※
For more information on the indicators, refer to the "3.4.2 7-Segment display".
12. PC communication port:
Insert the connect to the SFL / SFLA dedicated USB to Serial communication converter.
13. Setting switch:
You can set the function.
※
For more information on the setting swtich, refer to the "3.4.3 Setting switch".
(3) Upper part
14
14. Lamp output terminal
: It is located on the top of the emitter and receiver. Insert the lamp output cable and connect the external output
indicator. Tighten the end cap screws with a torque of 0.59 N m.
In case of the series connection, use dedicated series connection cable to connect light curtains.
(4) Bottom part
15
15. Power supply terminal
: It is located on the bottom of the emitter and receiver. Insert the power I/O cable for power supply.
Tighten the end cap screws with a torque of 0.59 N m.
In case of the series connection, use dedicated series connection cable to connect light curtains.
