3. Dimensions
39
© Copyright Reserved Autonics Co., Ltd.
i. -|Transparent setting guide|-
3.3.3 Setting switch
You can set functions via the setting switch. Be sure to select the same settings of emitter and receiver to activate the
functions. All factory defaults are OFF state.
Setting switch
No.
Function
Settings (marks in sticker)
ON
OFF(factory default)
ON
OFF
1
Select
NPN or PNP
NPN
PNP
2
Sensing distance Short (S)
Long (L)
3
Select
Frequency A or B Frequency B (FREQ B) Frequency A (FREQ A)
4
Reset-hold
Reset-hold (R-H)
Deactivated (OFF)
5
Interlock
Manual reset (MAN)
Auto reset (AUTO)
6
EDM
EDM
Deactivated (OFF)
7
Muting
MUTE
Deactivated (OFF)
8
Apply settings
atLightCurtain (PC)
Setting switch (SW)
When you change the switch settings, keep the following points in mind.
•
Be sure to complete the settings before applying the power. When the switch settings is changed during operation, light
curtain enters lockout condition because of switch error.
•
When the reset hold switch and muting switch are in ON state at the same time, they enter the lockout conditon.
•
When the switch settings of muting is ON position, the auxiliary output 2 (AUX 2) is deactivated.
•
When the switch settings of applying setting is OFF position, the switch settings are applied to the light curtain. If it is ON
position, the settings of atLightCurtain is applied to the light curtain. The switch settings are ignored.
•
In case of SFL (standard type), the position 8 of the setting switch is always OFF.
※
For more information on error and warnings, see "11. Troubleshooting".
