6. Other functions
84
© Copyright Reserved Autonics Co., Ltd.
i. -|Transparent setting guide|-
6.3
Set NPN or PNP
You can set input/output of OSSD, auxiliary output (AUX 1, 2), and lamp output (Lamp 1/2).
The ON or OFF state of input is determined by the output polarity.
In the NPN output, the status indicator is turned on. In the PNP output, the status indicator is turned off.
(1) When setting the NPN output
•
ON voltage: 0-3VDCᜡ
•
OFF voltage: 9-24VDCᜡ or open
(2) When setting the PNP output
•
ON voltage: 9-24VDCᜡ
•
OFF voltage: 0-3VDCᜡ or open
6.3.1 Setting change
You can change the mode via setting switch or atLightCurtain.
Only SFLA (advanced type) support atLightCurtain to change settings.
Function
Setting range
Factory default
Setting method
atLightCurtain
Setting switch (pin no.)
Output polarity
NPN/PNP
PNP
○
○(1)
※
In series connection, all slaves operate based on the settings of master.
※
For more information on external input and output based on the output polarity, see "2. Specifications"
※
For more information on I/O circuit diagrams based on the output polarity, see "7. Wiring"
