Appendix C Error Codes
Appendix A
Specifications
Specifications
A–2
Specifications
General
Operating Temperature
32
°
F to 131
°
F (0
°
C to 55
°
C)
Storage Temperature
–4
°
F to 158
°
F (–20
°
C to 70
°
C)
Ambient Humidity
5% – 95% relative humidity (non–condensing)
Voltage Withstand
1500VAC, 1 minute (DeviceNet connector internal)
Insulation Resistance
500VDC, 10M
Ω
(DeviceNet connector internal)
Vibration Resistance
MIL STD 810C, Method 514.2
Shock Resistance
MIL STD 810C, Method 516.2
Noise Immunity
NEMA (ICS3–304) Impulse noise 1
µ
s, 1000V
FCC class A RFI (145MHz, 435MHz 10W, 10cm)
Atmosphere
No corrosive gases
Environmental Pollution Level 2
Size
189”Wx315”Hx326”D (48Wx80Hx83D)
Weight
6.0 oz (170 g)
Communication
Communication form
DeviceNet Communication Protocol (Slave)
Predefined
Master/Slave
Group 2
Server only
Network Node Address
0 to 63 (Rotary switch setting)
Data Packet
0 to 8 Bytes (Data beyond eight bytes are divided.)
Communication Rate
(Max. cable length)
125KB
(1640 ft./ 500m)
250KB
(820 ft./ 250m)
500KB
(328 ft./ 100m)
Communication Status Indicator
MS: Module Status LED [Red/Green]
NS: Network Status LED [Red/Green]
DeviceNet Power Consumption
11 to 25 VDC (45mA max.)
DeviceNet
Device Type
Generic
Explicit Peer to Peer Message
No
I/O Peer to Peer Message
No
Configuration Consistency
No
Fault Node Recovery
No
Communication Baud Rate 125K,
250K, 500K
Yes
Master/Scanner
No
I/O Slave
Bit Strobe
Message
Polling
Cyclic
Change of State
No
Yes
No
No
Summary of Contents for T1K-DEVNETS
