Automation Direct T1K-DEVNETS, User Manual

Page: 17 / 64

Installing the DeviceNet
Base Controller
Installation and
Safety Guidelines
2–4
Installing the T1K–DEVNETS Base Controller
To remove the module from the base, grip the center of the base arm and rotate
outward releasing the module.
To remove the module assembly from the DIN rail, lift the clip arm up and slide the
module assembly away from the adjacent module. Pull the locking tab down (out)
and lift the assembly off the DIN rail. Refer to the “I/O Module Hot Swap Feature”,
page 3–17, in the
Terminator I/O Installation and I/O Manual ( T1K–INST–M ), to
remove an I/O module with Terminator I/O system power ON.
1
2
3
1. Pull base arm back to allow space for module to enter base
2. Align module slides with base track
3. Press module firmly into base
Insert Module into Base
Removing I/O
Modules from
the Base
Assembling the
I/O Modules
and Bases