Installing the DeviceNet
Base Controller
Installation and
Safety Guidelines
2–9
Installing the T1K–DEVNETS Base Controller
The Controller has two Status
Indicators, one for Module Status and
the other for Network Status.
MS (Module Status) Indicator
Indication
Status
OFF
No power to Controller. Check wiring.
ON (Green)
Power applied to Controller, no fault
ON (Red)
Critical Controller Fault
NS (Network Status) Indicator
Indication
Status
OFF
No power to Controller or no Network Access
Flashing Green
Online but not connected
Solid Green
Online, link okay and connected
Flashing Red
Recoverable fault
Solid Red
Critical Controller Fault (Duplicate ID or Bus off)
The Outputs switch enables or
disables outputs connected to the
Controller.
Note:
It is good safe practice to disable outputs before Hot Swapping modules if the
application allows this.
Status Indicators
Outputs Switch
Summary of Contents for T1K-DEVNETS
