Automation Direct T1K-DEVNETS, User Manual

Page: 15 / 64

Installing the DeviceNet
Base Controller
Installation and
Safety Guidelines
2–2
Installing the T1K–DEVNETS Base Controller
Installing the T1K–DEVNETS
2. Hook upper tab over upper flange of DIN rail.
3. Tilt the unit toward DIN rail until it snaps securely to DIN rail.
1. Make sure the locking tab is in the latched position (pushed in).
2
1
3
NOTE: Do not force the base controller onto the DIN rail.
Due to slight size variations in different manufacturer’s DIN
rail, it may be necessary to first unlatch the locking tab,
rotate the module into place, then latch the locking tab.
Slide the controller onto the DIN rail until the clip arm attaches securely to the
power supply.
WARNING: Power to the T1K Power Supply must be disconnected before installing
or removing the T1K–DEVNETS. Failure to disconnect power could result in serious
damage to the module, to the power supply or both.
Mounting
on DIN Rail
Connecting the
Controller to a
Power Supply