Appendix C Error Codes
Appendix E
RSNetW
orx Setup
RSNetWorx
t
Setup
E–2
Setup T1K–DEVNETS with RSNetWorx
t
For those who are using the T1K–DEVNETS as a slave with an Allen–Bradley PLC,
the examples on the following pages have worked for us, and will be a guide for you.
These steps should help you through the process of setting up your Allen–Bradley
DeviceNet network using RSNetWorx
t
. If you encounter any difficulties with the
setup process, please contact your local Rockwell International representative.
Begin by opening your RSLinx to configure the DeviceNet driver.
1. Click on
Communications.
2. Click on
Configure
Drivers
.
3. Click on the down
arrowhead, , and
select a driver from the
drop–down list.
4. Click
Add New.
A DF1 driver is selected in this
example.
Note:
Selecting a new driver may prompt you to reboot or to restart your computer.
RSLinx
Summary of Contents for T1K-DEVNETS
