Owner Installation Instructions
GDO-10V1 Toro
®
29
When GPI Input Is Confi gured As Day Light
Saving :
The GPI input can be used to
switch between STD time and DST (daylight
savings time). The time selected is the amount of time
added to STD time when DST is selected.
Options are OFF, 30, 60, 90 or 120 minutes. The GPI
input needs to be constantly active to show day light
saving time.
Open (opn) Input
(Activated by OPN terminal with N/O or N/C switch,
by transmitter button with OPN function assigned
or by OPEN button on console). Activating the OPN
input will cause the door to open. Holding the input
will prevent from closing. OPN input can also be
confi gured as 2nd P.E Beams input.
Stop (STP) Input
(Activated by STP terminal with N/O or N/C switch,
by transmitter button with STP function assigned or
by STOP button on console). Activating the STP input
while the door is moving will cause the door to be
stopped. If the STP terminal is held it will prevent the
door from being moved.
Close (CLS) Input
(Activated by CLS terminal with N/O switch, by
transmitter button with CLS function assigned or by
CLOSE button on console). Activating the CLS input
will cause the door to close. Holding the input active
will prevent opening.
Swipe Card (SWP) Input
(Activated by SWP terminal with N/O switch or by
transmitter button with SWP function assigned).
Activating the SWP input will cause the door to be
opened. If the terminal input is held it will prevent the
door being closed. The swipe input also effects PE
Beams TRIGGERED AUTO-CLOSE.
Vacation Mode
Vacation mode blocks all but one designated remote
control transmitter from activating the GDO-10 opener.
The mode is activated by pressing a transmitter button
with the VAC function assigned until the console displays
that vacation mode is enabled (approx. 5 secs). When
activated all the transmitter buttons will be ignored. To
turn Vacation mode off press a transmitter button with
the VAC function assigned. Vacation mode can also be
turned on or off manually by editing the VACATION
MODE parameter.
.
Standard Operating Modes
