Automatic Technology GDO-10v1Toro, User Manual

Page: 33 / 48

Owner Installation Instructions GDO-10V1 Toro ®
33
Time Clock Menu 8
The opener provides a programmable time clock which
can be used to control GDO-10 on a timed basis at
various times of the week. This section details the time
clock operation and confi guration.
Time Clock Operation
The time clock consists of a 7 day clock and storage for
32 programs. The clock is powered by its own battery
and therefore does not loose time when the GDO10-V1
is turned off. Each time clock program defi nes; the time
of the day and the days of the week it is to run and the
output function to be executed. Any combination of
the days of the week can be selected.
Step 13 Time Clock Settings
The Time clock settings are accessed by selecting the
Time clock menu (MENU 8). Press SET
(Fig. 49) to
enter the menu and then PREV or NEXT to navigate
through the options.
Menu 8.1 Set Time/date
This is where the current time, date and day are
displayed and set
(Fig. 50) .
NOTE:
the time is in a 24 hour format and the Day
of the week is not automatically set with the date.
To change the settings simply press UP or DOWN to
display the cursor and then move to the fi eld to be
changed using the NEXT / PREV buttons. Then press
OPEN/CLOSE to change the setting and then press
the SET or STOP buttons to save.
Menu 7.2 View Programs
Select this menu to display or edit the time clock
programs
(Fig. 51)
. When selected program number
1 is displayed and the cursor is shown on the program
number fi eld. The other fi elds shown include the
function, time and days of operation. The example
Above shows that output 1 will be SET on at 6 pm
on Mondays,Tuesdays, Wednesdays, Thursdays and
Fridays.. Use the OPEN /CLOSE buttons to scroll
though the other programs.
To edit a program simply press the NEXT / PREV
buttons to move the cursor onto the required fi eld and
press the OPEN/CLOSE button to change the value. To
save the program settings press SET or to exit without
saving press STOP.
MENU 8.1
Set Time/Date
PRESS
00:00:80 STD
--- 00/00/2000
MENU 8.2
View Programs
PRESS
49
fi g
50
fi g
51 fi g