13
The number of pressings shall be in the range
from 2 to 9. The interval between the pressings of
the buttons shall not exceed 2 seconds. There is
no difference between long and short pressings.
Buttons must be pressed firmly.
A different combination of buttons and sequence of
keystrokes is allowed, e.g. if you press the button
#1 twice and press the button #2 once, the system
will save all the clicks in this order. When you have
finished entering the PIN-code, the system will
display 3 confirmation signals of LED or buzzer,
regardless the number of clicks.
5. Enter the current PIN-code once again. If the PIN-
codes match than there will be 2 signals and the
PIN-code will be successfully saved
.
If there are 4 indication signals, it means the PIN-
code does not match and the PIN-code is not
changed. Turn off the ignition and repeat the items
1-6.
6. Turn off the ignition (if it was switched on, see p. 1).
ATTENTION!
Memorize the PIN-code or write it down
after it has been changed.
Do not leave PIN-code
information as well as this guide inside the car!
Motion sensor sensitivity adjustment
The motion sensor of the immobilizer provides 5
sensitivity levels (sensitivity increases from 1 to 5, by
default level 5 is activated). To change the sensitivity
level, follow these instructions:
Summary of Contents for Kvant 120
