AUTHOR Alarm Kvant 120, Operating Manual

Page: 23 / 32

23
10. Purple (0,2 mm
2
).
Normally Closed contact.
11. Green (0,2 mm
2
). Normally Opened contact.
12. White-black.
Common wire (for circuit blocking).
* «Inflow» – is the method of the device connection, when the usage of the
resistor array buttons is allowed in the absence of power supply from ECM (it
is a possible to use buttons on the driving wheel of the cars which turn off the
resistor array power supply when the ignition is off).
** Connect the grey wire (2) to «+» in order to turn on the system learning mode
(see p. 9). Disconnect the grey wire from «+» before PIN-code setting. The grey
wire can be used as an extra button with the «+» potential.
12
11
10
Blo
ck
in
g c
ir
cui
t