AUTHOR Alarm Kvant 120, Operating Manual

Page: 16 / 32

16
KVANT Immobilizer options
The options set in default («on» or «off») are marked
with grey colour in the table. The option number
corresponds to the number of keystrokes to set the
required state of the option.
No. Option off on
1
Entering Setup menu
–
2
Motion sensor sensitivity*
1 5
3
Ignition locking
1 2
4
AT switch locking
1 2
9
Resetting
–
* setting range from 1 to 5, see p. 13 for further details
To change the option status do the following
:
1. Switch on the ignition without starting the engine.
2. Enter the current PIN-code to authorize. There will
be 2 indication signals.
3. Enter the immobilizer Setup menu. For this purpose
press any of the buttons connected to the device and
retain it pressed during 10 seconds. The indication
LED or buzzer will give a signal once a second.
4. To select the option press any of the connected
buttons the number of times equal to the number
of the option in the table. The indication LED or the
buzzer will display the signals, quantity of which
corresponds to the current option value, then it will
start to display signals series, which correspond to
the option number.
5. Set the new option value by pressing any of the
connected buttons as many times as corresponds