69
Main Section
Column 1
—
displays wheel positions.
Column 2
—
displays the new created sensor IDs.
Column 3
—
displays the retrieved sensor IDs by activation or by OBD.
Column 4
—
displays the product serial number.
NOTE
Programming function will only work with Autel’s MX-Sensor. Currently, there are two
models available: Clamp-in Sensor and Snap-in Sensor, both with two types, one in
orange color with 433 MHz frequency, and one in dark gray color with 315 MHz frequency.
The Clamp-in Sensor is taken as an example in this manual. Please choose the proper
MX-Sensor when programming.
Copy by Activation
This function allows user to copy the retrieved sensor ID to the MX-Sensor. It is used
after the original sensor is triggered.
Figure 5-25 Copy by Activation Function Main Screen
To copy by activation
After performing the Check function (see
), trigger marks
with sensor IDs will appear on the table in the Programming screen.
Select the corresponding wheel, and then tap the
Copy by Activation
button.
Place the MX-Sensor near the top right of the tablet and tap
OK
to start
programming the retrieved sensor ID to the MX-Sensor.
