96
Flash Signal (R Key)
☞
The speakerphone can be used up to a certain distance (depending on various conditions). Be sure
that your party can clearly hear you as you are hearing him/her.
To adjust the speakerphone volume, see the
chapter Adjusting Voice Volume on page 94
Flash Signal (R Key)
When the line is engaged, the FLASH soft key sends the Flash signal. This key is used in conjunc-
tion with special services (e.g. call waiting, conference etc.) which can be available in your phone
network. For further details please contact your network telephone company. Moreover, if you are
connected to an extension of a switchboard (PABX), you can use the FLASH soft key to locally
transfer a call to another extension.
☞
If the FLASH soft key does not work properly, you need to change the Flash time. See
Setting the Area Code on page 131
Call waiting and other services can be available with additional charges. For further details please
contact your local telephone company.
Temporary Tone Dial Switchover
If you are using the pulse dialing because your telephone line doesn't support tone dialing (please
see
chapter Choosing the Dial Mode on page 91
), you might not be able to access certain external
services (e.g. automatic call centers, voice mailboxes, interactive telephone systems etc.), because
they need the tone dialing. You can avoid this limitation and access them anyway doing this:
FLASH
To transfer a call, or use the said special serv-
ices, just press the FLASH soft key while the
line is engaged: the display will show F.
Call to
0530692000
Call to
0530692000F
Call the number of the service you need to
access as you do normally.
As soon as you reached the service, press and
hold right navigation key until T is displayed:
your phone is temporarily switched to the tone
dial mode, so you can use the service.
When you hang up, the phone automatically
returns to the pulse mode.
Call to
0530692000
Call to
0530692000T
