AudioCodes MP-26 series, User Manual

Page: 52 / 464

User's Manual 52 Document #: LTRT-23510
MP-26x/MP-27x Multimedia Home Gateway
5.2 Menu Bar Description
The Web interface screens are conveniently grouped into related themes under specific
menus. These menus are located in the menu bar. The table below describes these
menus.
Table 5-1: Menu Description
Menu Description
Home Displays the Map View (refer to Chapter 6 on page 65 ).
Quick Setup Displays the 'Quick Setup' screen for quickly setting up an Internet connection with
the device (see Section
8.1 on page 73 ).
Network
Connections Displays the 'Network Connections' screen for configuring network connections:

LAN (see Section 12.2 on page 177 )

WAN (see Chapter 12 on page 153 )

VLANs (see Section 12.4 on page 213 )

LAN-WAN bridging (see Section 12.5 on page 221 )
Security Displays the 'Security' screen for configuring security-related features such as
Website restrictions (see Chapter
14 on page 253) .
Voice Over IP Displays the 'Voice Over IP' screen for configuring the VoIP parameters to use the
device's VoIP functionality to place and receive calls over the Internet using a
standard telephone set and DECT handset (see Chapter
9 on page 89 ).
QoS Displays the 'Quality Of Service' screen for configuring Quality of Service (QoS)
for the device (see Chapter
11 on page 135 ).
Advanced Displays the 'Advanced' screen for configuring system parameters (e.g., DHCP
server and DNS) and for administrative functions (e.g., changing password, setting
date and time, and upgrading the system).
Icon Name Description
3G Displays 3G dongle status and 3G dongle
access codes
(see Section 4.2.3 page 46 ).
About MP2xx Displays technical information about the
device, including version number (see
Section
19.1 on page 345 ).
Backup and
Restore Backup user and system data (see Section
19.3 on page 348 ).
Certificates Manages digital certificates (see Section
13.3 on page 232 ).
Configuration
File Loads the Configuration File to the device
(see Section
19.5 on page 353 ).
Note: You can hide the Configuration File
icon, by running the following CLI command
in a Telnet session with the device: