AudioCodes MP-26 series, User Manual

Page: 239 / 464

User's Manual 13. Remote Device Management
Version 4.4.0 239 MP26x/MP27x
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
MaxMTUSize mt_cwmp_param_wan_con
n_ip_max_mtu_size_get/se
t( i) The maximum allowed size of an Ethernet
frame from LAN-side devices.
Name mt_cwmp_param_wan_con
n_xxx_name_get/set(i) User-readable name of this connection.
NATEnabled mt_cwmp_param_wan_con
n_xxx_nat_enabled_get/set
(i ) Indicates if NAT is enabled for this
connection.
PortMappingNumberOf
Entries - Total number of port mapping entries.
PossibleConnectionTy
pes - A comma-separated list indicating the types
of connections possible for this connection
instance. Each element of the list is an
enumeration of:

“Unconfigured”

“IP_Routed”

“IP_Bridged”
RouteProtocolRx mt_cwmp_param_wan_con
n_xxx_route_protocol_rx_
get/set Defines the Rx protocol to be used:

“Off”

“RIPv1” (Optional)

“RIPv2” (Optional)

“OSPF” (Optional)
RSIPAvailable mt_cwmp_param_wan_con
n_xxx_rsip_available_get(i) Indicates if Realm-specific IP (RSIP) is
available as a feature on the device.
ShapingRate -
Rate to shape this connection’s egress traffic
to.
If less than or equal to 100, in percentages of
the rate of the highest rate-constrained layer
over which the packet travels on egress. The
rate is limited over the window period
specified by ShapeWindow.
If greater than 100, in bits per second.
A value of -1 indicates no shaping.
SubnetMask lan_host_config_managem
ent_get/set
rg_conf dhcps/ netmask
Subnet mask of the WAN interface. This
parameter is configurable only if the
AddressingType is Static.
SpecVersion “” Currently, 1.0 is the only available version.
Uptime - The time in seconds that this connection has
been up.