AudioCodes MP-26 series, User Manual

Page: 89 / 464

User's Manual 9. Configuring VoIP Parameters
Version 4.4.0 89 MP26x/MP27x
9 Configuring VoIP Parameters
The VoIP parameters are mainly configured in the 'Voice over IP' screen. This screen is
accessed by clicking the
Voice over IP menu in the side menu bar. The ‘Voice over IP'
screen provides tabs for configuring the following:

Signaling protocol (i.e., Session Initiation Protocol / SIP) – see Section 9.1 on page 89

Dialing – see Section 9.2 on page 96

Media streaming – see Section 9.3 on page 102

Voice and fax – see Section 9.4 on page 104

Supplementary services – see Section 9.5 on page 108

Line settings – see Section 9.6 on page 110

Line extensions – see Section 9.7 on page 119

Speed dials – see Section 9.8 on page 121

Telephone interfaces – see Section 9.9 on page 123

Bluetooth – see Section 9.10 on 124
In addition to the above, you can select the region in which your device is located so that
your analog telephone complies with the line standards (e.g., line impedance) of the area.
For more information, see Section
9.10.5 on page 129 .
Notes:
•
By default, the ‘Voice over IP’ screens initially display only basic
parameters. To view all the parameters, click the
Advanced button in the
required screen.
•
Once you have configured the VoIP parameters, you can start using your
analog telephones, as described in Chapter
9.10.6 on page 130 . For
using your DECT handset(s), see Part II .