AudioCodes MP-26 series, User Manual

Page: 241 / 464

User's Manual 13. Remote Device Management
Version 4.4.0 241 MP26x/MP27x
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
MaxAddress lan_host_config_managem
ent_get/set
rg_conf dhcps/end_ip
Specifies the last address in the pool to be
assigned by the DHCP server on the LAN
interface.
MinAddress lan_host_config_managem
ent_get/set
rg_conf dhcps/start_ip
Specifies the first address in the pool to be
assigned by the DHCP server on the LAN
interface.
SubnetMask lan_host_config_managem
ent_get/set
rg_conf dhcps/ netmask
Specifies the client’s network subnet mask.
13.4.2.1.3 Configuring VoIP via TR-104
Table 13-9: InternetGatewayDevice.Services.VoiceService.i.Capabilities
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
ButtonMap - Support for a configurable button map. A true
value indicates support for a configurable
button map via the
VoiceService.{i}.VoiceProfile.{i}.ButtonMap
object.
DSCPCoupled - A true value indicates that the CPE is
constrained such that transmitted call control
packets use the same DSCP marking as
transmitted RTP packets.
If the value is true, the CPE must not support
the DSCPMark parameter for call control.
EthernetTagging
Coupled - A true value indicates that the CPE is
constrained such that transmitted call control
packets use the same Ethernet tagging
(VLAN ID Ethernet Priority) as transmitted
RTP packets.
If the value is true, the CPE must not support
the VLANIDMark or EthernetPriorityMark
parameters within a call control object (e.g.,
SIP, MGCP, or H323).
FaxPassThrough - Support for fax pass-through. A true value
indicates support for the parameter
VoiceService.{i}.VoiceProfile.{i}.FaxPassThro
ugh. (True if
voip/audio/fax/fax_transport_mode equals
Bypass)
FaxT38
- Support for T.38 fax. A true value indicates
support for the object
VoiceService.{i}.VoiceProfile.{i}.FaxT38.
MaxLineCount voip/num_of_fxs_lines
Maximum number of lines supported across
all profiles.