Session Border Controllers
35
Mediant 4000B SBC
Hardware Installation Manual
4. Mounting the Device
7.
Hold the chassis in position while the second person secures the rear-mounting
flanges to the rear-mounting brackets. Insert the supplied screws (6-32 x 5/16 inch)
from the inside of the rack, through the flange's grid and into the screw hole on the
rear-mounting bracket. Finger-tighten the screws but make sure that the screws are
NOT fully tightened
and that the flange can freely move on the slide rails of the rear-
mounting bracket. For 80-cm rear mounting, up to two screws can be used to secure
the flange to the rear-mounting bracket (if required).
Figure 4-9: Fastening Rear-Mounting Flange to Rear-Mounting Bracket (60 cm)
Figure 4-10: Fastening Rear-Mounting Flange to Rear-Mounting Bracket (80 cm)
Summary of Contents for Mediant 4000B SBC
Page 2: ......
