Hardware Installation Manual
54
Document #: LTRT-41749
Mediant 4000B SBC
6.4
Installing the OSN Server Modules
The OSN server is a customer-ordered item. The procedure below describes how to install
the OSN server modules (OSN and HDMX) in the chassis.
Warning:
Power off the device before installing the OSN modules.
Avertissement:
Mettez l’appareil hors tension avant d’installer le OSN.
Note:
Before installing the OSN server modules, see Section
3.2.1
on page
17
for
module slot assignment.
To install the OSN sever modules:
1.
Disconnect the power cords from the power sources, and then remove the power
cords from the power connections on the two Power Supply modules.
2.
Install the OSN Module:
a.
Remove the blank AMC-module slot covers from the two slots intended for the
OSN server modules, by gently pulling on the handle of the modules until they
slide out of the slots completely.
Figure 6-7: Extracting Blank AMC Modules from Slots for OSN Server (Top View)
Summary of Contents for Mediant 4000B SBC
Page 2: ......
