Session Border Controllers
47
Mediant 4000B SBC
Hardware Installation Manual
5. Cabling the Device
To connect the device to the power supply:
1.
Connect the AC power cord (supplied) to one of the power sockets located on the rear
panel.
Figure 5-10: Connecting to Power
2.
Connect the other end of the power cord to a standard AC electrical outlet (100-
240V~50-60 Hz).
3.
Repeat steps 1 through 2 for connecting the second Power Supply module, but using
the power socket associated with the second Power Supply module and connecting
this to a different supply circuit.
4.
Turn on the power at the power source (if required).
5.
Check that the
POWER
LED on each Power Supply module (front panel) is lit green,
indicating that the device is receiving power.
Summary of Contents for Mediant 4000B SBC
Page 2: ......
